Augments Station This mod adds a station that facilitates combination/extraction of item augments and pet collars. The station can be obtained from the architect's table using the following recipe: Durasteel Bar x20 Gold Bar x5 Copper Wire x10 Silicon Board x4 Battery x1 Although another mod exists which allows for combination of augments, it did not allow for combination of pet collars or for extraction of augments/collars. Furthermore, it was rather unbalanced, in my opinion, as it allows for unlimited combination of augments (whereas my mod limits combined effects to 3). Here you see the augments station, in all its glory, alongside its simple interface. Two slots on the left for input, and one on the right for output. To combine augments, place any two (including previously combined augments) in the left input slots, and then click 'Process'. Note that the resultant augment may not possess more than 3 effects total. Once processing is complete, you'll find the newly-combined augment in the output slot. Note the description lists what effects are included, and the price reflects the sum of each constituent augment. The process for combination of collars is identical to that of augments. Again, you'll find the newly-combined collar in the output slot upon completion. To extract an augment, place an augmented item in either input slot, and then click 'Process'. Note that the tooltip for an augmented item will list all included effects. Upon completion, the augmented item will now display its new status. In the output slot, you'll find the extracted augment. The process for extraction of collars is identical to that of augments. The capture pod will display its updated status upon completion. The extracted collar will be deposited into the output slot.